TECHNICAL SPECIFICATIONS

• rated power 50% – 36 kVA
• welding current ( for 6% cycle) 14,4 kA
• pressure force 510 daN (at 6 bar)
• arm reach 200 – 800 mm
• microprocessor controller
• weight 75 kg

TECHNICAL DETAILS

• Single or serial operation
• Gyroscopic suspension on sealed bearings ensures easy rotation of the tongs and maneuverability in any position
• Pneumatic components requiring no lubrication and eliminating oil mist ejection
• Water-cooled transformer and secondary circuit , i.e. electrodes, electrode holders and welding arms
• Throttle-return valves to control the speed of the electrodes, and compressed air bleed dampers to reduce noise levels.
• Electrode force regulated by a pressure reducer assembly
• Safety switch immediately shuts down the welder
• Adaptable to customer specifications, i.e. specialized : mounts, electrodes, overhangs
• CE mark

TECHNICAL SPECIFICATIONS

• rated power 50% – 42 kVA
• welding current ( for 6% cycle) 17.6 kA
• pressure force 510 daN (at 6 bar)
• arm reach 200 – 800 mm
• microprocessor controller
• weight 85 kg

TECHNICAL DETAILS

• Single or serial operation
• Gyroscopic suspension on sealed bearings ensures easy rotation of the tongs and maneuverability in any position
• Pneumatic components requiring no lubrication and eliminating oil mist ejection
• Water-cooled transformer and secondary circuit , i.e. electrodes, electrode holders and welding arms
• Throttle-return valves to control the speed of the electrodes, and compressed air bleed dampers to reduce noise levels.
• Electrode force regulated by a pressure reducer assembly
• Safety switch immediately shuts down the welder
• Adaptable to customer specifications, i.e. specialized : mounts, electrodes, overhangs
• CE mark

TECHNICAL SPECIFICATIONS

• rated power 20% – 55 kVA
• welding current ( for 6% cycle) 14 kA
• pressure force 220 daN (at 6 bar)
• arm reach 200 – 800 mm
• microprocessor inverter controller
• weight 52 kg

TECHNICAL DETAILS

• Single or serial operation
• Gyroscopic suspension on sealed bearings provides easy rotation of the tongs and maneuverability in any position
• Pneumatic components requiring no lubrication and eliminating oil mist ejection
• Water-cooled transformer and secondary circuit , i.e. electrodes, electrode holders and welding arms
• Throttle-return valves to control the speed of the electrodes, and compressed air bleed dampers to reduce noise levels.
• Electrode force regulated by a pressure reducer assembly
• Safety switch immediately shuts down the welder
• Adaptable to customer specifications, i.e. specialized : mounts, electrodes, overhangs
• low power requirement
• long electrode life
• three-phase power supply
• CE mark

TECHNICAL SPECIFICATIONS

• rated power 20% – 140 kVA
• welding current ( for 6% cycle) 20,8 kA
• pressure force 510 daN (at 6 bar)
• arm reach 200 – 800 mm
• microprocessor inverter controller
• weight 90 kg

TECHNICAL DETAILS

• Single or serial operation
• Gyroscopic suspension on sealed bearings provides easy rotation of the tongs and maneuverability in any position
• Pneumatic components requiring no lubrication and eliminating oil mist ejection
• Water-cooled transformer and secondary circuit , i.e. electrodes, electrode holders and welding arms
• Throttle-return valves to control the speed of the electrodes, and compressed air bleed dampers to reduce noise levels.
• Electrode force regulated by a pressure reducer assembly
• Safety switch immediately shuts down the welder
• Adaptable to customer specifications, i.e. specialized : mounts, electrodes, overhangs
• low power requirement
• long electrode life
• three-phase power supply
• CE mark

TECHNICAL SPECIFICATIONS

• Welding capacity :

• Hard parameters – hump area up to 50 mm²
• Soft parameters – hump area up to 80 mm²

• rated power 50% – 80 kVA
• welding current ( for 6% cycle) 24 kA
• clamping force 1200/1900 daN (at 6 bar)
• arm reach 285 mm
• stroke of actuator 125 mm
• controller ZSM-1214

TECHNICAL DETAILS

• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an auxiliary pedal for direct recall of program No. 2.
• Transformer and secondary circuit of the welding machine, i.e., electrode holders, electrodes and water-cooled brass T-plates.
• Synchronous, water-cooled thyristor with built-in protective thermostat and phase-cut current control
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark

TECHNICAL SPECIFICATIONS

• Welding capacity :

• Hard parameters – hump area up to 60 mm²
• Soft parameters – hump area up to 90 mm²

• rated power 50% – 120 kVA
• welding current ( for 6% cycle) 28 kA
• clamping force 1200/1900 daN (at 6 bar)
• arm reach 285 mm
• stroke of actuator 125 mm
• controller ZSM-1214

TECHNICAL DETAILS

• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an auxiliary pedal for direct recall of program No. 2.
• Transformer and secondary circuit of the welding machine, i.e., electrode holders, electrodes and water-cooled brass T-plates.
• Synchronous, water-cooled thyristor with built-in protective thermostat and phase-cut current control
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark

TECHNICAL SPECIFICATIONS

• Welding capacity :

• Hard parameters – hump area up to 70 mm²
• Soft parameters – hump area up to 110 mm²

• rated power 50% – 150 kVA
• welding current ( for 6% cycle) 35 kA
• clamping force 1200/1900 daN (at 6 bar)
• arm reach 285 mm
• stroke of actuator 125 mm
• controller ZSM-1214

TECHNICAL DETAILS

• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an auxiliary pedal for direct recall of program No. 2.
• Transformer and secondary circuit of the welding machine, i.e., electrode holders, electrodes and water-cooled brass T-plates.
• Synchronous, water-cooled thyristor with built-in protective thermostat and phase-cut current control
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark

TECHNICAL SPECIFICATIONS

• Welding capacity:

• Hard parameters – hump area up to 35 mm²
• Soft parameters – hump area up to 55 mm²

• rated power P 20% – 170 kVA
• welding current ( for 20% cycle) 16.5 kA
• clamping force 1200/1900 daN (at 6 bar)
• arm reach 285 mm
• stroke of actuator 125 mm

TECHNICAL DETAILS

• High reliability and stability of delivered current
• Wider ability to control the welding process
• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an additional pedal for direct recall of program No. 2.
• Inverter , transformer and secondary circuit of the welding machine i.e. electrode holders, electrodes and brass T-plates – water-cooled.
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark

TECHNICAL SPECIFICATIONS

• Welding capacity:

• Hard parameters – hump area up to 50 mm²
• Soft parameters – hump area up to 75 mm²

• rated power P 20% – 170 kVA
• welding current ( for 20% cycle) 24 kA
• clamping force 1200/1900 daN (at 6 bar)
• arm reach 285 mm
• stroke of actuator 125 mm

TECHNICAL DETAILS

• High reliability and stability of delivered current
• Wider ability to control the welding process
• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an additional pedal for direct recall of program No. 2.
• Inverter , transformer and secondary circuit of the welding machine i.e. electrode holders, electrodes and brass T-plates – water-cooled.
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark

TECHNICAL SPECIFICATIONS

• Welding capacity :

• Hard parameters – hump area up to 70 mm²
• Soft parameters – hump area up to 110 mm²

• rated power P 20% – 340 kVA
• welding current ( for 20% cycle) 33 kA
• clamping force 1200/1900 daN (at 6 bar)
• arm reach 285 mm
• stroke of actuator 125 mm

TECHNICAL DETAILS

• High reliability and stability of delivered current
• Wider ability to control the welding process
• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an additional pedal for direct recall of program No. 2.
• Inverter , transformer and secondary circuit of the welding machine i.e. electrode holders, electrodes and brass T-plates – water-cooled.
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark