CAR POINT mobile spot welding machine

The spot welder is designed for a wide range of applications in the engineering industry and auto repair shops. The unit can be equipped with both a multi-function gun and a pneumatic welding handle, providing versatility and efficiency for a variety of tasks.

The multi-functional gun offers spot welding with one-sided access, as well as welding and pulling of various types of parts such as pins, nails, washers, rivets and screws. In addition, the gun can be used as a dent puller, making it an extremely versatile tool in any professional workshop.

The welding tongs are equipped with a variety of tips that allow precise access to hard-to-reach areas, especially in car bodies. Thus, the device meets the highest standards of efficiency and quality necessary for professional use.

Rated power: 8 kVA at 50% air-cooled
11 kVA at 50% water-cooled

Medium frequency direct current (MFDC) inverter welder with microprocessor control.

POWER GUN technology allows for high spot welding currents with low absorption rates, the use of longer (5 m) and lighter cables for better holding and wider operating range, and minimal magnetic fields around the cables. Automatic pressure monitoring provides excellent control of the force applied to the gun electrodes.

It is particularly suitable for workshop and industrial applications and also provides excellent results on high-strength steel (HSS)/boron and galvanized sheets.

The innovative SMART AUTOSET technology, with its automatic recognition of materials and thicknesses, eliminates setup time and guarantees optimal spot welding, even if the types of steel to be processed are not known.

WAVE technology facilitates interaction with the machine and tracks all operating parameters for processing and reporting.

Using the multifunction digital panel, the automatic Smart Autoset mode can be selected, as well as EASY mode and manual mode; generated programs and reports can be transferred to a USB flash drive.

Features:

• Pre- and post-heating for intervention on HSS and galvanized metals;
• automatic recognition of arm and inserted tool
• mains voltage monitoring;
• automatic control of machine, clamp and cable cooling;
• adjustment of approach time, tilt, weld and hold;
• pulse welding control;
• automatic/manual adjustment of electrode pressure.
• Complete with water-cooled air gun.

Inverter spot welder with Wave OS technology and TFT color panel

Medium frequency direct current (MFDC) inverter spot welder with microprocessor control.

POWER GUN technology allows for high spot welding currents with low absorption rates, the use of longer (5 m) and lighter cables for better hold and wider operating range, and minimal magnetic fields around the cables. Automatic pressure monitoring provides excellent control of the force applied to the gun electrodes.

It is particularly suitable for workshop and industrial applications and also provides excellent results on high-strength steel (HSS)/boron and galvanized sheets.

The innovative SMART AUTOSET technology, with its automatic recognition of materials and thicknesses, eliminates setup time and guarantees optimal spot welding, even if the types of steel to be processed are not known.

WAVE technology facilitates interaction with the machine and tracks all operating parameters for processing and reporting.

Using the multifunction digital panel, the automatic Smart Autoset mode can be selected, as well as EASY mode and manual mode; generated programs and reports can be transferred to a USB flash drive.

Features:

• Pre- and post-heating for intervention on HSS and galvanized metals;
• automatic recognition of arm and inserted tool
• mains voltage monitoring;
• automatic control of machine, clamp and cable cooling;
• adjustment of approach, tilt, weld and hold times;
• pulse welding control;
• automatic/manual adjustment of electrode pressure.
• Complete with water-cooled air gun.

TECHNICAL DATA

• Welding capacity :

• 5 mm + 5 mm sheets
• Hard parameters – hump area up to 40 mm²
• Soft parameters – hump area up to 65 mm²

• Rated power P50% – 80 kVA
• welding current ( for 6% cycle) 21 kA
• Clamping force 700/1200 daN (at 6 bar)
• arm reach 400/500/630/1000 mm
• stroke of actuator 125 mm
• microprocessor-based welding controller ZSM-1214

TECHNICAL DETAILS

• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an auxiliary pedal for direct recall of program No. 2.
• Transformer and secondary circuit of the welding machine, i.e., electrode holders, electrodes and water-cooled brass T-plates.
• Synchronous, water-cooled thyristor with built-in protective thermostat and phase-cut current control
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark

TECHNICAL DATA

• Welding capacity :

• 6 mm + 6 mm sheets
• Hard parameters – hump area up to 50 mm²
• Soft parameters – hump area up to 80 mm²

• rated power P50% – 120 kVA
• welding current ( for 6% cycle) 25 kA
• Clamping force 700/1200 daN (at 6 bar)
• arm reach 400/500/630/1000 mm
• stroke of actuator 125 mm
• microprocessor-based welding controller ZSM-1214

TECHNICAL DETAILS

• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an auxiliary pedal for direct recall of program No. 2.
• Transformer and secondary circuit of the welding machine, i.e., electrode holders, electrodes and water-cooled brass T-plates.
• Synchronous, water-cooled thyristor with built-in protective thermostat and phase-cut current control
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark

TECHNICAL DATA

• Welding capacity :

• 6 mm + 6 mm sheets
• Hard parameters – hump area up to 65 mm²
• Soft parameters – hump area up to 105 mm²

• rated power P50% – 150 kVA
• welding current ( for 6% cycle) 33 kA
• clamping force 1200 daN (at 6 bar)
• arm reach 400/500/630/1000 mm
• stroke of actuator 125 mm
• microprocessor-based welding controller ZSM-1214

TECHNICAL DETAILS

• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an auxiliary pedal for direct recall of program No. 2.
• Transformer and secondary circuit of the welding machine, i.e., electrode holders, electrodes and water-cooled brass T-plates.
• Synchronous, water-cooled thyristor with built-in protective thermostat and phase-cut current control
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark

TECHNICAL DATA

• Welding capacity :

• 5 mm + 5 mm sheets
• hard parameters – hump area up to 35 mm²
• soft parameters – hump area up to 50 mm²

• rated power P20% – 170 kVA
• welding current ( for 20% cycle) 16.5 kA
• clamping force 700/1200 daN (at 6 bar)
• arm reach 400/500/630/1000 mm
• stroke of actuator 125 mm
• inverter welding controller

TECHNICAL DETAILS

• High reliability and stability of delivered current
• Wider ability to control the welding process
• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an additional pedal for direct recall of program No. 2.
• Inverter , transformer and secondary circuit of the welding machine i.e. electrode holders, electrodes and brass T-plates – water-cooled.
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark

TECHNICAL DATA

• Welding capacity :

• 6 mm + 6 mm sheets
• hard parameters – hump area up to 45 mm²
• soft parameters – hump area up to 75 mm²

• rated power P20% – 170 kVA
• welding current ( for 20% cycle) 24 kA
• Clamping force 1200 daN (at 6 bar)
• arm reach 400/500/630/1000 mm
• stroke of actuator 125 mm
• inverter welding controller

TECHNICAL DETAILS

• High reliability and stability of delivered current
• Wider ability to control the welding process
• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an additional pedal for direct recall of program No. 2.
• Inverter , transformer and secondary circuit of the welding machine i.e. electrode holders, electrodes and brass T-plates – water-cooled.
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark

TECHNICAL DATA

• Welding capacity :

• 6 mm + 6 mm sheets
• Hard parameters – hump area up to 65 mm²
• Soft parameters – hump area up to 105 mm²

• rated power P20% – 340 kVA
• welding current ( for 20% cycle) 33 kA
• clamping force 1900 daN (at 6 bar)
• arm reach 400/500/600 mm
• stroke of actuator 125 mm
• inverter welding controller

TECHNICAL DETAILS

• High reliability and stability of delivered current
• Wider ability to control the welding process
• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an additional pedal for direct recall of program No. 2.
• Inverter , transformer and secondary circuit of the welding machine i.e. electrode holders, electrodes and brass T-plates – water-cooled.
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark

TECHNICAL DATA

• Welding capacity :

• 6 mm + 6 mm sheets
• Hard parameters – hump area up to 85 mm²
• Soft parameters – hump area up to 140 mm²

• rated power P20% – 340 kVA
• welding current ( for 20% cycle) 44 kA
• clamping force 1900 daN (at 6 bar)
• arm reach 400/500 mm
• stroke of actuator 125 mm
• inverter welding controller

TECHNICAL DETAILS

• High reliability and stability of delivered current
• Wider ability to control the welding process
• Brass plates (top and bottom) for heavy duty and long service life with T-slots
• Height-adjustable lower plate for quick installation of dedicated tooling
• Welding machine clamping system with pneumatic cylinders
• Pneumatic components requiring no lubrication, eliminating oil mist ejection.
• Built-in air filter; air shut-off device.
• Valves to control electrode speed and air discharge dampers to ensure minimum noise.
• Connection for an additional pedal for direct recall of program No. 2.
• Inverter , transformer and secondary circuit of the welding machine i.e. electrode holders, electrodes and brass T-plates – water-cooled.
• Two-hand welding start from the two-hand control panel
• Safety switch immediately shuts down the welding machine.
• Proportional valve for electronic control of clamping force regulated by the control unit
• Optional pre-stroke clamping system
• CE mark