TECHNICAL DATA

• Welding capacity :
  • 4 mm + 4 mm sheets
  • Cross bars Ø 10 mm + 10 mm
• rated power 50% – 40 kVA
• welding current ( for 6% cycle) 17 kA
• pressure force 460 daN (at 6 bar)
• arm reach 400/500/600/700 mm
• microprocessor controller ASM-913

TECHNICAL DETAILS

• Single or serial operation
• Infinitely adjustable height of the lower reach
• Pneumatic components requiring no lubrication and eliminating oil mist ejection
• Water-cooled transformer and secondary circuit , i.e. electrodes , electrode holders and welding arms
• Throttle-return valves to control the speed of the electrodes, and compressed air bleed dampers to reduce noise levels.
• A foot-operated two-stage start button, which, in addition to the function of single or serial operation, allows two workpieces to be pressed together without current and, after checking the positioning by pressing the button more deeply, to be welded in a fixed position
• Synchronous, water-cooled thyristor with built-in protective thermostat and phase-cut current control
• Electrode force regulated by a pressure regulator unit equipped with a pressure gauge and a filter for automatic air stripping
• Optional proportional valve to electronically control the clamping force of the clamping system
• Safety switch immediately shuts down the welding machine.
• Possibility to use bent, flat and special electrodes
• CE mark

TECHNICAL DATA

• Welding capacity – metal sheets 3 mm + 3 mm
• rated power 50% – 25 kVA
• welding current ( for 6% cycle) 10 kA
• clamping force 460 daN (at 6 bar)
• usable depth 285/285/485/585 mm
• microprocessor controller ASM-913

TECHNICAL DETAILS

• Single or serial operation
• Infinitely adjustable bottom overhang height
• Pneumatic components requiring no lubrication and eliminating oil mist ejection
• Water-cooled transformer and secondary circuit , i.e. electrodes, electrode holders and welding arms
• Throttle-return valves to control the speed of the electrodes, and compressed air bleed dampers to reduce noise levels.
• A foot-operated two-stage start button that, in addition to the function of single or serial operation, allows two workpieces to be pressed together without current and, after checking the positioning by pressing the button deeper, welded in a fixed position
• Synchronous, water-cooled thyristor with built-in protective thermostat and phase-cut current control
• Electrode force regulated by a pressure regulator unit equipped with a pressure gauge and a filter for automatic air stripping
• Optional proportional valve to electronically control the clamping force of the clamping system
• Safety switch immediately shuts down the welding machine
• Possibility to use bent, flat and special electrodes
• CE mark

TECHNICAL DATA

• Welding capacity – 4 mm + 4 mm metal sheets
• rated power 50% – 40 kVA
• welding current ( for 6% cycle) 15 kA
• clamping force 460 daN (at 6 bar)
• usable depth 285/285/485/585 mm
• microprocessor controller ASM-913

TECHNICAL DETAILS

• Single or serial operation
• Infinitely adjustable bottom overhang height
• Pneumatic components requiring no lubrication and eliminating oil mist ejection
• Water-cooled transformer and secondary circuit , i.e. electrodes, electrode holders and welding arms
• Throttle-return valves to control the speed of the electrodes, and compressed air bleed dampers to reduce noise levels.
• A foot-operated two-stage start button that, in addition to the function of single or serial operation, allows two workpieces to be pressed together without current and, after checking the positioning by pressing the button deeper, welded in a fixed position
• Synchronous, water-cooled thyristor with built-in protective thermostat and phase-cut current control
• Electrode force regulated by a pressure regulator unit equipped with a pressure gauge and a filter for automatic air stripping
• Optional proportional valve to electronically control the clamping force of the clamping system
• Safety switch immediately shuts down the welding machine
• Possibility to use bent, flat and special electrodes
• CE mark

TECHNICAL DATA

• Welding capacity – 5 mm + 5 mm sheets
• rated power 50% – 80 kVA
• welding current ( for 6% cycle) 18 kA
• clamping force 700 daN (at 6 bar)
• usable depth 285/285/485/585 mm
• microprocessor controller ASM-913

TECHNICAL DETAILS

• Single or serial operation
• Infinitely adjustable bottom overhang height
• Pneumatic components requiring no lubrication and eliminating oil mist ejection
• Water-cooled transformer and secondary circuit , i.e. electrodes, electrode holders and welding arms
• Throttle-return valves to control the speed of the electrodes, and compressed air bleed dampers to reduce noise levels.
• A foot-operated two-stage start button that, in addition to the function of single or serial operation, allows two workpieces to be pressed together without current and, after checking the positioning by pressing the button deeper, welded in a fixed position
• Synchronous, water-cooled thyristor with built-in protective thermostat and phase-cut current control
• Electrode force regulated by a pressure regulator unit equipped with a pressure gauge and a filter for automatic air stripping
• Optional proportional valve to electronically control the clamping force of the clamping system
• Safety switch immediately shuts down the welding machine
• Possibility to use bent, flat and special electrodes
• CE mark

TECHNICAL DATA

• Welding capacity :
  • 2 mm + 2 mm sheets
  • Cross bars Ø 5 mm + 5 mm
• rated power 50% – 6 kVA
• welding current ( for 6% cycle) 8.5 kA
• clamping force 180 daN (at 6 bar)
• arm reach 300 mm
• microprocessor controller ASM-913

TECHNICAL DETAILS

• Single or serial operation
• Pneumatic components requiring no lubrication and eliminating oil mist ejection
• Water-cooled transformer and secondary circuit , i.e. electrodes , electrode holders and welding arms
• Throttle-return valves to control the speed of the electrodes, and compressed air bleed dampers to reduce noise levels.
• A foot-operated two-stage start button, which, in addition to the function of single or serial operation, makes it possible to press two workpieces together without current and, after checking the positioning by pressing the button more deeply, weld them in a fixed position
• Synchronous, thyristor with built-in protective thermostat and phase-cut current control
• Electrode force regulated by a pressure regulator unit equipped with a pressure gauge and a filter for automatic air stripping
• Optional proportional valve to electronically control the clamping force of the clamping system
• Safety switch immediately shuts down the welding machine.
• Possibility to use bent, flat and special electrodes
• CE mark

TECHNICAL DATA

• Welding capacity :
  • 3 mm + 3 mm sheets
  • Cross bars Ø 8 mm + 8 mm
• rated power 50% – 25 kVA
• welding current ( for 6% cycle) 12 kA
• pressure force 460 daN (at 6 bar)
• arm reach 400/500 mm
• microprocessor controller ASM-913

TECHNICAL DETAILS

• Single or serial operation
• Infinitely adjustable height of the lower reach
• Pneumatic components requiring no lubrication and eliminating oil mist ejection
• Water-cooled transformer and secondary circuit , i.e. electrodes , electrode holders and welding arms
• Throttle-return valves to control the speed of the electrodes, and compressed air bleed dampers to reduce noise levels.
• A foot-operated two-stage start button, which, in addition to the function of single or serial operation, allows two workpieces to be pressed together without current and, after checking the positioning by pressing the button more deeply, to be welded in a fixed position
• Synchronous, water-cooled thyristor with built-in protective thermostat and phase-cut current control
• Electrode force regulated by a pressure regulator unit equipped with a pressure gauge and a filter for automatic air stripping
• Optional proportional valve to electronically control the clamping force of the clamping system
• Safety switch immediately shuts down the welding machine.
• Possibility to use bent, flat and special electrodes
• CE mark

TECHNICAL DATA

• Welding capacity :
  • 4 mm + 4 mm sheets
  • Cross bars Ø 10 mm + 10 mm
• rated power 50% – 40 kVA
• welding current ( for 6% cycle) 17 kA
• pressure force 460 daN (at 6 bar)
• arm reach 400/500 mm
• microprocessor controller ASM-913

TECHNICAL DETAILS

• Single or serial operation
• Infinitely adjustable height of the lower reach
• Pneumatic components requiring no lubrication and eliminating oil mist ejection
• Water-cooled transformer and secondary circuit , i.e. electrodes , electrode holders and welding arms
• Throttle-return valves to control the speed of the electrodes, and compressed air bleed dampers to reduce noise levels.
• A foot-operated two-stage start button, which, in addition to the function of single or serial operation, allows two workpieces to be pressed together without current and, after checking the positioning by pressing the button more deeply, to be welded in a fixed position
• Synchronous, water-cooled thyristor with built-in protective thermostat and phase-cut current control
• Electrode force regulated by a pressure regulator unit equipped with a pressure gauge and a filter for automatic air stripping
• Optional proportional valve to electronically control the clamping force of the clamping system
• Safety switch immediately shuts down the welding machine.
• Possibility to use bent, flat and special electrodes
• CE mark

TECHNICAL DATA

• Welding capacity
  • 3 mm + 3 mm sheet metal
• Rated power 50% – 15 kVA
• short-circuit current – 9.7 kA
• pressure force 190 daN (at 6 bar)
• arm reach of 330 mm
• microprocessor controller

TECHNICAL DETAILS

• Column spot welder with movable arms, digitally controlled with a microprocessor;
• Digital multifunctional LCD control panel allows operation: in EASY mode (setting current and spot welding time); in EXPERT mode (setting various spot welding parameters) storage of up to 20 custom programs;
• operates in both continuous and pulse modes and provides optimal results on different types of steel;
• adjustment of spot welding current (%), time (cycles), electrode pressure force and speed;
• selection of various spot welding cycle parameters (approach, slope, welding and pause time, and number of pulses);
• easy-to-read LCD display;
• pneumatic foot start button control
• adjustable arm gap;
• thermal protection with indicator;
• adjustable air flow for slow arm closure
• Model requires water cooling of electrodes and arms.
• CE mark

TECHNICAL DATA

• Welding capacity
  • 5 mm + 5 mm sheet metal
• Rated power 50% – 25 kVA
• short-circuit current – 16.4 kA
• pressure force 220 daN (at 6 bar)
• arm reach of 330 mm
• microprocessor controller

TECHNICAL DETAILS

• Column spot welder with movable arms, digitally controlled with a microprocessor;
• Digital multifunctional LCD control panel allows operation: in EASY mode (setting current and spot welding time); in EXPERT mode (setting various spot welding parameters) storage of up to 20 custom programs;
• operates in both continuous and pulse modes and provides optimal results on different types of steel;
• adjustment of spot welding current (%), time (cycles), electrode pressure force and speed;
• selection of various spot welding cycle parameters (approach, slope, welding and pause time, and number of pulses);
• easy-to-read LCD display;
• pneumatic foot start button control
• adjustable arm gap;
• thermal protection with indicator;
• adjustable air flow for slow arm closure
• Model requires water cooling of electrodes and arms.
• CE mark

Microprocessor-controlled spot welding machine. It uses a new Fuzzy logic control system, which simplifies the use and increases the quality of spot welding.
It is suitable for spot welding metal sheets with a maximum thickness of 2+2 mm.

Features:

• Automatic adjustment of spot welding current and time according to material thickness;
• Selection between continuous and pulsed operation (suitable for high yield strength metal sheets – high stress);
• Arm pressure adjustable from 40 kg to 120 kg (with arms L = 120 mm);
• Hand grip made of thermally insulating material;
• thermal protection.